Monitor for Furrion FOS43TASF Observation Camera System Not Getting Power

Question:

Monitor is plug to power and camera,pushed in camera button for two seconds,monitor shows no signal

asked by: Douglas C

Expert Reply:

If you're not seeing the blue LED on the monitor, it means that it's not getting power. You can use a circuit tester like # PTW2993 on the 12-V accessory socket to make sure it's getting power. If it's not, check the fuse for the 12-V outlet and replace.

If the socket is getting power, the fuse in the plug itself is likely blown. Unscrew the metal tip of the plug as shown in the photo and check the fuse. You might not be able to visually confirm if it's blown, so it's not a bad idea to test the fuse. Your local auto parts store should be able to do that for you. It it is blown, you'll need a 125 volt, 2-amp slow burn fuse as a replacement, which your auto parts store should have.

expert reply by: Mike L