How to Get Replacement Arms for Roadmaster Base Plates on 2012 Ford Edge
Question:
I have a 2012 ford edge with Kit 524426-1 on the car. I think the removable arms I need are C002075 and C002076. I also need the falcon 2 tow bar. Is there anything else I need for the tow bar package less the safety cables etc. thanks
asked by: Steve J
Expert Reply:
You can get replacement arms for the Roadmaster EZ Base Plate Kit # 524426-1 on your 2012 Ford Edge with the Roadmaster Replacement Arms for Base Plate Kits # RM-ARMS.
There will be a link titled "Installation Details" on the product page which you have to click on that will allow you to order the new arms.
As for the tow bar you mentioned, the correct part is the Roadmaster Falcon 2 Tow Bar # RM-520.
I'm not sure what other parts you were referring to by "tow bar package" but apart from safety cables, if you don't have anything else the other parts you need are the Wiring Kit # RM-15267, Roadmaster InvisiBrake Supplemental Braking System # RM-8700, Brake-Lite Relay Kit # RM-88400, and a high-low adapter like # RM-076.
I've added a link to a help article which shows you how to determine if you need an adapter, as well as a link to our selection of adapters.
Products Referenced in This Question
Roadmaster EZ Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 6" Rise/Drop - 6K GTW, 200 lbs TW
- Accessories and Parts
- Tow Bar
- Hitch Adapters
- High-Low Adapter
- Fits 2 Inch Hitch
- 6 Inch Rise/Drop
- Roadmaster
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
Roadmaster InvisiBrake Flat Tow Brake System - Preset
- Tow Bar Braking Systems
- Brake Systems
- Pre-Set System
- One Time Set-Up
- Fixed System
- Power Assist Brake Compatible
- Air Brakes
- Hydraulic Brakes
- Roadmaster
more information >
Roadmaster Brake-Lite Relay Kit for Towed Vehicles
- Tow Bar Braking Systems
- Brake Light Relay
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Replacement Arms for Base Plate Kits
- Accessories and Parts
- Base Plates
- Arms
- Driver Side
- Passenger Side
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Mounting Hole Spacing And Cutou Hole Requirement For The Roadmaster 4-Wire Connector
- Q&A: Will Roadmaster XL Base Plate Kit # 278-1 Fit a 2006 Chrysler PT Cruiser
- Q&A: Can a 2015 Chevrolet Sonic LTZ With Automatic Transmission Be Flat Towed?
- Q&A: Parts Needed to Flat Tow a 2013 Honda CR-V AWD Behind a Motorhome
- Q&A: Can Thule DockGrip Fit OEM Crossbars of 2020 Subaru Forester
- Q&A: Is a 7-Round to 4-Round Adapter for Trailer Lights Available?
- Q&A: Needing a Trailer Wiring Adapter From RV to Flat Towed Vehicle
- Article: Trailer Wiring Diagrams
- Article: Harvest Hosts
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose a High-Low Adapter
- Article: Trailer Hitch Receiver Sizes
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Article: Brake Controller Installation: Starting from Scratch