Option to Lower Nose of Trailer Using Curt A20 Hitch for Ram Rail Kits
Question:
No, I don’t. I have not used it in the year I have owned it. What is the difference between the Curt E series and the A series?
asked by: Deven M
Expert Reply:
Typically you can raise the pin box in the frame brackets of the trailer to allow the nose of the trailer to sit lower. I would see if you can do that as that might be an easy fix. The Curt A16 hitch for Ram rail kits part # C16520-16021 has a height adjustment range of 14 to 18 inches so if your is measuring 20 inches that to me seems like yours isn't in the lowest position or you are using the hitch designed for industry standard rails and a rail kit adapter part # RP30154 which would add height.
We also have lift kits for tandem axle trailers that could help like the part # RR23QX.
Products Referenced in This Question
Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000 lbs
- Accessories and Parts
- Fifth Wheel Installation Kit
- Adapters
- Rail Adapter
- Reese
more information >
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- RV Ride Control
more information >
Product Page this Question was Asked From
Curt A16 5th Wheel Trailer Hitch for Ram Towing Prep Package - Dual Jaw - 16,000 lbs
- Fifth Wheel Hitch
- Fixed Fifth Wheel
- Aftermarket Below Bed Rails
- 4000 lbs Vertical Load
- 16000 lbs GTW
- Cushioned Double Pivot
- Standard - Double Jaw
- 14 - 18 Inch Tall
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Ram Trailer Tow Prep Package
- Q&A: Weight of B&W Companion OEM 5th Wheel Hitch # BWRVK3600
- Q&A: Does Curt PowerRide 5th Wheel Hitch Fit 2023 Ram 3500 With OEM Puck System
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Compatible Puck Adapter B&W Patriot 5th Wheel Hitch
- Q&A: Will Curt A16 5th Wheel Hitch Fit Factory Pucks on 2022 Ram 2500
- Q&A: Dimensions of the Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Q&A: Curt A16 5th Wheel hitch Vs. B&W Companion 5th Wheel Hitch for 2022 Ford F-250 short bed w/ OEM Prep
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: Gooseneck to 5th Wheel Adapters
- Article: The Best 5th Wheel Hitches
- Article: Gooseneck Trailer Hitch Information and Review
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
Deven M.
8/19/2020
I have a Curt A16 fifth wheel slide hitch installed in my Ram 2500 crew cab/short bed with the factory puck system. The issue I have is that the hitch head sits level with my bed sides, thereby making my camper ride high when hauling. I have the head lowered as far as it can go so that is not an option. I am looking for an option for my existing hitch or looking at a different hitch with a lower profile. The current hitch is 20inch tall from the bed to the top of the hitch head.