Will Trailer Hub # AKIHUB-545-35-K Fit in Place of TDE Hub 11033
Question:
I need to replace a TDE 11033 hub. Your AKIHUB-545-35-K is almost the same except that my TDE hub doesnt have the raised extension on the lug side of the hub. A photo of the TDE hub is attached FYI. The hub goes into a Kodiak Rotor-10 that has a 3inch ID hole that your hub would have to press in to. Its also going onto a TDE axle torsion spindle #84 if that helps. Is it compatible/Will it fit?
asked by: Jim L
0
Expert Reply:
Based on the spindle your trailer has the hub part # AKIHUB-545-35-K is going to fit on it despite it having what looks like a different design overall.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Vehicle Cargo Control
- Shop: Transmission Cooler
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Correct Hubs for Boat Trailer with L68149 and L44649 Bearings
- Shop: Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Silver - 2" Ball - Bolt On - 10K
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: etrailer Trailer Idler Hub Assembly Installation
- Search Results: a frame coupler repair kit
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Q&A: Difference Between EZ Lube Compatible Hubs and Regular Hubs
- Q&A: Correct 5-Lug Hub for Square #84 Spindle TRU47FR
- Q&A: Highest Weight Rated Trailer Hubs that have Bolt Pattern of 5 on 4-1/2 inches
- Q&A: Which Grease Cap for AKIHUB-545-35-K 3500 lb Idler Hub Assembly
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU47FR
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13511 Review
- Video: Review of CE Smith Trailer Hubs and Drums - Hub - CE13311
- Search Results: tde 46210