USA Made Trailer Tire Recommendation for Size 225/75R15 that is Most Reliable

Question

Question:

I have an aliner classic. Bought Karrier tires from you 3 years ago and doing fine, but I change tires every 3 years for safety. I know theres a lot of controversy about tires and recently Michelin has revived its reputation in this market theres a concern over Chinese manufacturers. Which tires, on your website, are American made and have the highest quality. Do you carry the Michelins?

asked by: Gary S

0

Expert Reply:

Goodyear Endurance trailer tires are the only USA made trailer tire out there. In the size of 225/75-15 that you referenced we have a Goodyear part # 724857519 which is definitely your best choice. These have the best tread design, warranty, speed rating etc. and overall are the most reliable so I recommend them the highest. I attached a review video for this tire for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Replacing the passenger tires you have on your trailer as soon as you can is a smart idea as passenger vehicle tires are not rated properly for trailer use and they would be very likely to fail. In the tire size of ST225/75R15 the best option is…

view full answer...

Answer 2

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is…

view full answer...

Answer 3

In order to upgrade from a 205/75-15 tire to a larger size, the 225/75-15 which is what we offer you will need to account for the reduced clearance. The new size is 1.2" larger in diameter and .8" larger in width but you only need…

view full answer...

Answer 4

Since the Torflex Lift Kit #K71-723-01 will put the frame of your trailer up 2-5/8" higher than what it is now you can go with a bigger tire size. The largest that I recommend going with is the ST185/80R13 for which we have the Kenda Karrier…

view full answer...

Answer 5

Thanks for the information on your trailer. For your axle with brakes I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 #AKHD-655-6-EZ-K if you have the spindles with the integrated grease…

view full answer...

Answer 6

Okay, let's start real quick with if you should have different load rated tires on your tandem axle trailer - you can, but it isn't advisable as they will wear differently, or you'd need to keep a real close eye on the psi of each tire to…

view full answer...

Answer 7

The eZ latch of the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K #DM16680-52 is absolutely just as safe as a slide lock coupler. It doesn't use a pin but still exceeds the SAE J684 safety…

view full answer...

Answer 8

Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard somewhere…

view full answer...

Answer 9

The Castle Rock ST225/75R15 Radial Trailer Tire part #274-000029 is a great tire option even though it's not made in the USA. The main cause of blowouts that we see is attributed to either improper psi or overloading. There is a huge…

view full answer...

Answer 10

The most common 5 bolt pattern is 5 on 4-1/2. However, 5 bolt patterns also come 5 on 4-3/4, 5 on 5, and 5 on 5-1/2. It is important to know the bolt pattern before you buy new wheels to ensure a proper fit. I have attached an article on how to…

view full answer...

Answer 11

Yes, for a single axle trailer you will add the weight rating of both tires for your total tire weight rating. So for the Load Range D Castle Rock ST225/75R15 Radial Trailer Tire #274-000029 you will take the individual rating of 2,540 lbs at 65 psi…

view full answer...

Answer 12

The highest weight capacity available for a 15 inch wheel with a 6 on 5-/12 inch bolt pattern is 2,830 lbs. You will need to use a 16 inch wheel with a 6 on 5-1/2 inch bolt pattern to get a wheel that has a 3,000-lb or higher weight capacity. I have…

view full answer...