What is the Length of the Top Rail on the Pace Edwards JackRabbit Contractor Rack

Question

Question:

How long are the top rails?

asked by: Robert

0

Expert Reply:

The total length of the top rails on the Pace Edwards JackRabbit Cover with Contractor Rack # JEC95A17-CR4005 is 138" long and they will extend over the truck cab.

expert reply by: Erik B

0

Answer 1

The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack #311-CR6008 is designed to slide into the T-Tracks found in explorer series rails so it would require a tonneau cover. It is also not a fit for your 2022 Ford F-350 though so the closest…

view full answer...

Answer 2

I reached out to the manufacturer, Pace Edwards, who provided me with the dimensions they have available for the Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack #311-CR3005, as you can see by the cut out I added. The legs measure…

view full answer...

Answer 3

The big functional difference between the UltraGroove #311-KRFA05A28 and JackRabbit #311-JEFA05A28 is that the JackRabbit is a flush design that doesn't add any height to the top of the bed rails and the UltraGroove is a low profile cover…

view full answer...

Answer 4

The ladder rack I recommend installing with the Mountain Top EVO-M Retractable Hard Tonneau Cover with T-Slot Accessory Rails #MNT48VR on your 2022 Ford F-250 Super Duty short bed is the Yakima OverHaul HD #Y01151-5855. I really like this rack…

view full answer...

Answer 5

There is a really nice option for a tonneau cover and over-the-bed ladder rack for your 2016 Chevy Silverado 1500 with a 6-1/2 foot bed, with the correct fit depending on what cab your truck has: - Regular Cab: Pace Edwards JackRabbit Retractable…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 11

With the weight of your camper I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL35FJ. I prefer these as they have the internal jounce bumper which helps to reduce the bounce that is often associated with towing a trailer and…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What is the Length of the Top Rail on the Pace Edwards JackRabbit Contractor Rack

Product Page this Question was Asked From

Continue Researching