Hydraulic Surge Conversion To Electric on Trailer with 3,500 lb Axles
Question:
I have a double axel hydraulic surge drum brake system on a 12x6 utility trailer. The Atwood 61101 actuator needs replaced. The hydraulic cylanders look shot on all 4 10 drums and unsure about pressure for lines. Would it be better/Cheaper to switch to electric breaks for only the rear. Hauling utv. I already have break controller on truck. The bearing size is L44649. Looking for suggested parts for either option.
asked by: Drew W
Helpful Expert Reply:
Converting to electric brakes would be pretty easy as it would be just a matter of replacing the brake assemblies with electric ones and running some 10 gauge wire like part # 10-1-1 to the assemblies.
The easiest assembly set would be the part # AKEBRK-35-SA which are self adjusting. These will work great with your current drums as well.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Uni-Servo Wheel Cylinder for 10", 12" and 13" Dexter Brake Assemblies - Zinc - LH
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- Wheel Cylinder
- 10 Inch
- 12 Inch
- 13 Inch
- Uni-Servo
- Dexter
more information >
Continue Researching
- Q&A: Difference Between Single, Dual and Free Backing Servo Brake Assemblies
- Q&A: Correct Replacement for Ttian 225S Disc Brake Calipers
- Q&A: Suggested Replacements for Titan Coupler and Brake Calipers
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: How to Pick Out Replacement Wheel Cylinders and Master Cylinder for Surge Brake Trailer
- Article: Testing Breakaway Systems
- Q&A: Different Between Uni-Servo Wheel Cylinder RH Item # T0977600 & LH Item # T0977700
- Q&A: Can Replacement Parts Still Be Had for Atwood Hydraulic Braking Assemblies 84210
- Q&A: Tang Washer Recommendation for Use on Trailer Spindle with L44649 Bearings
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Wiring Diagrams
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Tell the Weight Rating of a Trailer Axle