How To Confirm Fit Of Adjustable Ball Mount for 2" Hitches TK5007
Question:
Hi, I have a Jayco 184bs baja edition with a GVWR of 4,000 lbs. I tow it with a 2010 Tundra and a 2019 4runner. I followed you measurement guide and need a 10inch rise for truck and a 7inch rise for the 4runner. I have a 4 inch rise now i think and the trailer is definitely not level when towing. Would this work for my needs? I wont be buying a trailer that weighs any more than this. Thx.
asked by: Mathew T
Expert Reply:
The Adjustable Ball Mount for 2" Hitches part # TK5007 offers up to a 9" rise and a 10-1/4" drop. In order to confirm this will work for your setup you need to measure from the ground to the top inside edge of the trailer hitch and then subtract the distance from ground to the bottom of the trailer coupler while level. That said, you also need to stay under the 5,000 lb weight capacity.
In order to add a hitch ball to the above ball mount, I recommend the Convert-A-Ball Interchangeable Ball Set part # 900b.
Products Referenced in This Question
Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank - Nickel
- Trailer Hitch Ball
- Trailer Hitch Ball
- Interchangeable Ball Set
- Nickel-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2 Inch Diameter Ball
- 2-5/16 Inch Diameter Ball
- 2-1/2 Inch Shank Length
- 1 Inch Diameter Shank
- 10000 lbs GTW
- Class III
- Convert-A-Ball
more information >
Product Page this Question was Asked From
Adjustable Ball Mount for 2" Hitches - 9" Rise to 10-1/4" Drop - 5,000 lbs
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 10 Inch
- Rise - 9 Inch
- Fits 2 Inch Hitch
- 5000 lbs GTW
- Class III
- Convert-A-Ball
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can a Trailer Ride With the Tongue at an Upward or Downward Angle
- Q&A: Suspension Enhancement Recommendation for 2019 Toyota RAV4
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: How to Route the Trailer Wiring Plug Permanently Outside Next to the Hitch on a 2011 Toyota Sienna
- Q&A: How Close Does Trailer Ball Height Need to be to the Height of the Trailer Coupler
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: What Do I Need To Tow A Trailer?
- Article: 2023 Best Gifts for Haulers & Towers
- Q&A: Trailer Hitch & Towing Set Up For 2013 Hyundai Genesis Sedan
- Q&A: How To Secure a Can-Am Spyder On a Trailer
- Q&A: Recommended Parts to Flat Tow a 2024 Chevy Silverado 2500