10 Inch Electric Brake Assemblies for Boat Trailer
Question:
I have a 1998 Prestige boat trailer for a 20 foot Crownline boat that i want to replace the surge brakes on to electric. Not sure of the axle load. Can not read info on trailer tag. 10 inch hubs. Hole spacing on mount is 2 13/16inch center to center with 7/16 inch holes. 14inch rims Dual axle. What are my choices for brakes? Would it be good ideal to replace grease seal? Not sure what size or what i would need. Thanks
asked by: Chad N
Expert Reply:
Thanks for all that info, and the hole spacing you mentioned for your brake mounting flange means you have a standard 4-bolt flange like Brake Mounting Flange # 4-35.
Based on that and the 10 inch drums you have then the brakes you need are for 3,500 lb axles and for that I recommend the Electric Trailer Brake Kit # AKEBRK-35-SA.
These are self-adjusting electric brakes that measure 10" x 2-1/4" and will work with your brake mounting flange and 14 inch wheels. To install them you'd just need the Mounting Hardware for 10" Brake Assemblies # BRKH10B.
I have added a link to a video review of the brakes for you to check out as well.
In regards to the grease seal, it doesn't need to be replaced unless you are having an issue. To get the right one you would need to remove your hub and measure your spindle with a digital caliper where the seal rides.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Product Page this Question was Asked From
Brake Mounting Flange for 2-3/8" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 10 Inch
- 2-3/8 Inch Diameter Axle
- Redline
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Demco vs. etrailer Hydraulic Dacromet 3,500 lb Trailer Brakes
- Q&A: Recommendation for Installation of a Brake Mounting Flange on a Trailer Spindle and Axle
- Q&A: Recommended Disc Brake System for Salt Water Boat Trailer with Tandem Axles
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: 86-1/2 Inch Long Axle Option For Grand Design Trailer
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Leaf Spring Recommendation for 4,400 lb Trailer Axle
- Q&A: Recommended Wet Bolt and 2-1/4" Shackle Strap Kit for Tandem Axle Trailer
- Q&A: Do I Need Brakes On Both Axles of a Car Hauler Trailer?
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs