Replacement Wheel and Tire Recommendation for Size 4.80-12 with Pilot Diameter 2.5 inch
Question:
Hi. We have a trailer tire 12 in, 5 bolt and 2.5 center hole pilot hole? what tire rim do we need. My husband insists that we need a 2.5 in center hole. Can you please help. Pictures attached. Thanks
asked by: Kathy
Expert Reply:
Thanks for the pictures of your wheels and tires! Based on that I can tell that your wheels are lug-centric which means they center on to the hub via the lug nuts and not the center hole of the wheel. So you just need to have a pilot diameter that will fit over the bore of your hub and you'd be set. The part # AM30660 that you referenced has a pilot diameter of 3.19 inches and will work great.
Product Page this Question was Asked From
Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Max Highway Speed Rating for 4.80-12 Tires
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Increasing Wheel/Tire Size on Carry-On Utility Trailer
- Q&A: Smaller Trailer Tire Than 215/75R14 w/ 5 on 4-1/2" Bolt Pattern To FIt in Garage
- Q&A: What Size Wheels And Tires Will Fit On a Carry On 5 X 7 Trailer With Axle Flipped?
- Q&A: What is the Difference Between Load Range B and C Trailer Tires of the Same Size
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Tires for Highway Travel on 5x8 Utility Trailer With 4.80-12 Tires
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure for Trailer Hitch Drop
- Article: The #1 RV Roof Maintenance Tip: Keep it Clean (Here's How)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)