Troubleshooting Ground Control Leveling System Control Panel

Question:

I turn the battery on and the touchpad keeps beeping error then it goes to press enter to acknowledge. When I press enter nothing happens nor does hitting the power button its like its not even connected to the system anymore. when I went back to get pictures it didnt do anything. Not even hitting the power button. Really hoping its the touchpad thats listed in this blog.

asked by: Michael A

Expert Reply:

Often an issue like you stated has to do with the battery not being fully charged. If the battery is even slightly low, sometimes this system is a little finicky. I recommend first charging your battery fully and testing it to ensure it is fully charged then if you have the same issue, I'd replace the panel with the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System # LC421484.

expert reply by: Jason S

click to enlarge

Wynanda S.

7/5/2020

First time out with new trailer, goes great till time to store trailer. When camping it was plugged into shore power, battery shows full, we left the batteries connected, so they would continue to charge. We unhitch it, the front levelers are up. We then try to auto level it, and we get an error - low voltage. How can we have a low voltage error, when it is still plugged into the truck. I had turned off the frig, no lights were on. Nothing plugged in. Are my batteries bad - we have two 12 volt batteries. Is it the LCI 6 leveler? Not sure what to do, it is on the front ones only, the other 4 "legs" are not down. How do I charge the battery while it is in storage?

Chris R.

7/9/2020

I would definitely check the condition of your batteries. They need to be completely charged and healthy - you should read at least 13 volts coming out from the batteries if using a multi-meter. A less than fully charged bank would certainly lead to his issue.