Will Convert-A-Ball Cushioned Ball Mount # AMSC2 Work for a 3000 lb Sunline Camper
Question:
I have a Nissan Frontier and a 3000 lb Sunline camper trailer. Will the below mentioned product take the jerkiness out of towing it or will it be too rigid being rated for 10000 lbs. Cushioned Ball Mount for 2 Hitches - 3/4 Rise - 2 Drop - 10,000 lbs Convert-A-Ball Ball Mount
asked by: Don R
Expert Reply:
If the jerking you are referring to is the fore and aft movement of your existing ballmount in the receiver, then the Convert-A-Ball Cushioned Ball Mount would certainly help to reduce that. Though the ball mount has a 10,000 lb capacity, the cushioning would still be effective for a 3000 lb camper.
If the jerking is primarily caused by slop, which is a ballmount that fits loosely in the receiver allowing some up/down and side to side play, an anti-rattle device like the Roadmaster Quiet Hitch, part # RM-061 would work better for you.
To determine which issue is causing your problem, grab the ballmount while its installed and see if more movement is allowed front to back or up and down and side to side.
Products Referenced in This Question
Roadmaster Quiet Hitch for 2" Trailer Hitches
- Hitch Anti-Rattle
- Standard Anti-Rattle
- Universal
- Fits 2 Inch Hitch
- Sleeve Style
- Accessory Anti-Rattle
- Towing Anti-Rattle
- Roadmaster
more information >
Product Page this Question was Asked From
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Matte Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Shock Absorbing
- Convert-A-Ball
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Dexter Brake Assembly Recommendations to Replace Part Number 023-357-00
- Q&A: My 5th Wheel Hitch Has Small Gap on Jaws When Connected to King Pin
- Q&A: Trailer Idler Hub That Uses a LM67048 Bearing and Has a 5 on 4-1/2 Inch Bolt Pattern
- Q&A: Above vs Below-Bed Hitches and Recommended Hitch for 2018 Ford F-350 with 6.75-Foot Bed
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Can Demco Kar Kaddy X Be Used to Tow 2022 Chevy Spark with Automatic Transmission
- Article: How Much Does a Boat and Trailer Weigh?
- Q&A: Mounting Bolt Pattern For Ultra-Fab Phoenix Electric Trailer Jack with Remote # UF38-944055
- Q&A: Do Both Axles On a Tandem Axle Trailer Need To Be The Same Length
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Steel vs. Aluminum Ball Mounts
- Article: Trailer Lighting Requirements
- Article: Calculating Portable Generator Power Needs