Axle-Less Trailer Suspension Recommendation for a Military Trailer Using 5 on 5" Bolt Pattern Wheels
Question:
Hi ?? what axle less suspension with 5 on 5 bolt pattern would you recommend for a 4x6 military trailer. I was looking at the timbren option. Thank you
asked by: Inca4x4
Expert Reply:
The Timbren Axle-Less systems are definitely the way to go and are right where my mind went when I was reading your question.
For your application you'll need a system rated for 3,500 lbs. If you need something with a higher weight rating let me know. I have linked our selection of 3,500 lb systems that you can filter through but you should just be able to use the straight spindle system # ASR3500S05 that doesn't have any kind of lift or drop.
When it comes to a hub with a 5 on 5" bolt pattern we have 2 different options; just the hub as part # AKIHUB-550-35-EZ-K or the hub and drum as part # AKHD-550-35-EZ-K. The hub and drum setup is for if you'll be using brakes on the trailer. If this is the case then I recommend using the brake kit # AKEBRK-35-SA which is self-adjusting.
Attached are some installation videos that you can check out. Also you'll want to double check that you have a 5 on 5" bolt pattern. There are a few different 5-bolt patterns for a trailer so it's always good practice to double check. I have attached a few helpful links you can check out to help you make sure of this.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Difference Between Kodiak 3,500 lb Hub & Rotor Disc Brakes
- Q&A: Running Lights on Trailer Stay On All the Time
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Hub and Rotor for 3,500 lb Axle of Trailstar Trailer
- Q&A: Upgrading to 3,500 Axle on Overloaded Boat Trailer
- Q&A: Replacement for Lippert 3,500 Lb LCI35-SB-85-68.5 Axle
- Q&A: How to Confirm Fit of #84 E-Z Lube Spindle with Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Q&A: Comparing Uni-Servo and Free Backing Hydraulic Drum Trailer Brakes
- Article: Most Popular Wheel Bearings
- Article: Where to Position the Trailer Axle?
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Gooseneck to 5th Wheel Adapters
- Article: Stability Control for Heavy Duty Vehicles
- Article: How to Measure a Trailer Axle