Does the Snap Up Bracket Need to Be Secured to the Trailer Frame
Question:
are the lift bracket to be bolted tight or lose on the trailer frame, i have heard it does not matte ras long it will not fall off . tension on the bars will keep it tight
asked by: Paul B
Expert Reply:
You do need to secure the snap up brackets to the trailer frame. The chains use the snap up bracket as a support and if the bracket was not secured to the trailer frame, then the bracket could move or fall off any time the tension is released from the chains, such as a big dip or bump in the road.
Even if the bracket moves, which would be possible even under a load, the effectiveness of the weight distribution system would be compromised. You would continually have to check and measure to make sure the bracket is in the correct position each time you made a stop, assuming it did not fall off.
Product Page this Question was Asked From
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Recommended TorkLift Hitch and Extension for a 2024 Chevy Silverado 3500
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Can the TorkLift Everest Weight Distribution System Be Used w/ a SuperTruss Extension?
- Q&A: Is there a Longer Weight Distribution Shank for a B&W Continuum?
- Q&A: What Does Underslung Coupler Look Like for Picking Out B and W Continuum Weight Distribution
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Q&A: Comparing the Equal-i-zer Hitch Vs The Reese Wieght Distribution Hitch With Dual Cam Sway Control
- Q&A: Can Strait Line Weight Distribution be Used with Feather Lite Trailer