Replacement Hub Seals for Dexter 12,000 lb Axle
Question:
I’m looking for all seals for dexter 12000 pound axle it has the 7 bolt pattern on the backing plate if that helps
asked by: Shane
0
Expert Reply:
For your Dexter 12,000 lb axle the seal you are looking for based on my research is the # 10-56. It has an inner diameter of 3.125 inches and an outer diameter of 4.5 inches. This will work well for oil or grease.
If you are needing the other seal for an oil bath, you would also want the Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle # RG04-270 which comes with the cap, o-ring, and rubber plug.
expert reply by:
Jason S
0
Products Referenced in This Question
Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 3.984 Inch O.D.
- Redline
more information >
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Oil Seals
- 3.125 Inch I.D.
- 4.500 Inch O.D.
- Redline
more information >
Continue Researching
- Shop: Oil Seal
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Parts Needed to Switch a Trailer From Surge Brakes To Electric Over Hydraulic Brakes
- Q&A: Recommended Complete Flat Towing Setup for a 2021 Chevrolet Blazer
- Q&A: Replacement LP Gas Detector
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Parts for Dexter Disc Brake Caliper BP18-045
- Q&A: Similar Tire Size Replacement for 7.50x16 That Is Radial Construction
- Q&A: Can the 7-Way Plug On the Electric Jack w/ Footplate EJ-3527-BBX Be Removed
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper
- Article: Trailer Wiring Diagrams
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Trailer Maintenance Schedule
- Article: How to Bleed Your Trailer Surge Brakes