Electric Trailer Brakes Compatible with 10 Inch Hubs
Question:
Have an old 1996 camper with dual axles. The electric brakes went kaput and the standard 10inch replacements have a 4.5inch center to center bolt pattern but the axles have 3inch center to center mounting holes. Will the 7inch electric brakes work? or is there an off-size 9inch model somewhere that will fit?
asked by: P B
Expert Reply:
The 7 inch brakes fit brake flange # 4-34 which has hole spacing 2-7/8 inches on center. The 10 inch assemblies have a the same 2-7/8 inch on center mounting holes # 4-35. It sounds like your brake flange is likely the standard size and you will simply use standard 10 inch brake assemblies like # AKEBRK-35.
There is not a 9 inch assembly or any other assembly that will fit 3 inch on center flanges, so I hope you have the standard 2-7/8 inch flange.
Products Referenced in This Question
Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 7 Inch
- 1-3/4 Inch Diameter Axle
- Redline
more information >
Brake Mounting Flange for 2-3/8" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 10 Inch
- 2-3/8 Inch Diameter Axle
- Redline
more information >
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended 5 Lug Timbren Axle-Less System for 13" Trailer Tires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: 2,000 lb Hub & Drum Compatible With 13 Inch Wheels
- Q&A: Parts Needed to Add Electric Brakes to a Utility Trailer with a 3500 Lbs Axle and Brake Flanges
- Q&A: How Much Does The Roadmaster Nighthawk All-Terrain Tow Bar RM-676 Weigh?
- Q&A: 2,200 lb Axle Replacement System for Triton Snowmobile Trialer
- Q&A: Replacement Brake Assemblies for 2,200 lb Reliable Trailer Axles