Trailer Lights Not Working with 7-Way Trailer Connector on a Toyota Landcruiser
Question:
My friend has a cargo trailer with brake/turns lights and a 7-way blade conector. The lights work correctly on my 1999 Dodge 2500 and my friends 2007 GMC 2500, but not on his older Landcruiser that has separate turn/brake lights with 7-way connector harness. Do I need to rewire the Landcruiser with a newer harness or is there an adapter? Like the P-HM48925
asked by: Paul
Expert Reply:
Since the trailer lights work fine when being towed by other vehicles, the problem is clearly with the vehicle. I would recommend you use a Circuit Tester, item # PTW2993, to test the trailer connector on the Land Cruiser. Test the lighting pins on the connector as each lighting function is activated.
Do you know if the trailer connector on the Land Cruiser is factory or aftermarket? If it is factory installed, there should be fuses on the vehicle that manage the towing circuits. One of these fuses could be blown. The vehicle owner's manual should offer more information regarding the specific location of these fuses.
If the connector is aftermarket, there should be a taillight converter, like the small box you see on the part # HM48925 that you mentioned. Find this box by tracing the wiring back from the trailer connector and use the circuit tester to test the wires entering and exiting the converter box.
If there is a signal going in, but not out, the converter has gone bad and must be replaced. If you need to replace the converter, the part number HM48925 that you mentioned would work fine. If the 7-Way connector is more than several years old, and is showing some corrosion on it, it might be a good idea to replace it as well.
We offer a 4 to 7-way adapter, part # 37185, that the converter would plug right into, requiring no cutting or splicing. We have a video that outlines the complete procedure for troubleshooting your trailer connector, I will include a link to the video which can be found below.
Products Referenced in This Question
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
Hopkins Tail Light Converter with 4-Way Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 6 Feet Long
- Universal Fit
- 4 Flat
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Trailer Wiring
- Q&A: Aftermarket Tail Light Converter for 1999 Toyota Land Cruiser
- Q&A: Install Video that Can be Used for 2007 Toyota Avalon for Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Is The Hopkins Custom Tail Light Wiring Kit # HM87VR Compatible With LED Tail Lights?
- Q&A: Latch Repair Kit For Bulldog A256 2-5/16" Ball Latch Coupler
- Q&A: How to Get Separate Turn Signals and Brake Lights to Work on a Trailer
- Q&A: Installation of Coupler Repair Kit # CP02-050
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Choose a Cargo Carrier That Will Clear a Rear Mounted Spare Tire or Bumper