Recommended Replacement Landing Gear For 1988 Fleetwood Cimarron Model 32
Question:
Hello, I have a 1988 Fleetwood Cimarron Model 32 5L 5th Wheel. My landing gear gears are trashed and would like to know if you carry replacement parts. There is no markings what so ever on the gear. If no part available and I need to replace the entire set-up what do you suggest or what info do I need to give to find the correct size. Thanks
asked by: Robert C
Expert Reply:
Without knowing the brands of landing gear on the 1988 Fleetwood Cimarron Model 32 its not possible to find the replacement gears. Since the landing gear is most likely older, the best option is to just replace it.
I recommend to measure the distance between the mounting brackets on the 5th wheel. The most common measurement is 17-1/2". If that is the the measurement between your mounting brackets, I recommend the Landing Gear Set w/ Handle part # RVLG-8HDL which gives you 36-1/2" Lift with 8,000 lbs capacity. I recommend to add the motor part # LC142178 which will allow the landing gear to move faster.
If your brackets are not measured 17-1/2" apart then you can always have the brackets removed and re-welded 17-1/2" apart.
If you measure and your brackets are 21-1/4" apart then you can use the Ultra-Fab Deluxe Electric Landing Gear Set part # UF17-943010 which has a 38" lift.
Products Referenced in This Question
Lippert Venture 5th Wheel RV Landing Gear Motor
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Motor
- Lippert
more information >
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- Landing Gear
- 38 Inch Lift
- Weld-On
- 2 Jacks
- Ultra-Fab Products
more information >
Product Page this Question was Asked From
Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 7001 - 8000 lbs
- Landing Gear
- Sidewind Jack
- 36 Inch Lift
- Weld-On
- 2 Jacks
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Bracket Dimensions of the etrailer RV Landing Gear System # RVLG-8HDL
- Q&A: Determining The Correct Replacement Landing Gear Set For A 1997 Forest River Sierra
- Q&A: How to Know if Landing Gear Set # RVLG-8HDL Will Fit 2001 Sunnybrook 31BWFS
- Q&A: Replacement Crank Handle for Ram 5th Wheel Landing Gear Compatibility With 2007 Fleetwood Nitrous TT
- Q&A: How to Choose the Correct Replacement Landing Gear for 5th Wheel Trailer
- Q&A: How to Measure to Pick Out Replacement Landing Gear for a Trailer
- Q&A: Are Replacement Parts for Atwood Landing Gear Available or Will Another Brand Fit
- Article: Trailer Wiring Diagrams
- Article: Best Landing Gear
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Most Popular Wheel Bearings
- Article: Stability Control for Heavy Duty Vehicles
- Article: Where to Position the Trailer Axle?
- Article: How Much Solar Power Do I Need For My RV?