Replacement Brake Shoes and Drums for a 2013 Keystone Montana Mountaineer with Dexter 7K Axles

Question:

Need replacement brake shoes 2013 Montana mountaineer 5 wheel with Dexter 297697 7k axles. They have auto adjusters and I do not see the linings for them 12x2” Just whole assemblies. Also may take a drum or 2. Will also use the dexter ez lube dust cover caps. Probable 4 of them. Do you have these parts? Thank you for in advance!

asked by: Randy V

Helpful Expert Reply:

The correct replacement brake shoes for a 2013 Keystone Montana Mountaineer with Dexter 7,000 lb Nev-R-Adjust Braking Assemblies is going to be the Replacement Shoe and Lining for Nev-R-Adjust 12" x 2" Electric part # K71-675 for the left hand side or part # K71-676 for the right hand side. That said, we also offer the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-464-465 which will save you some work.

If you need new hubs/drums, the Dexter Trailer Hub and Drum Assembly part # 42866UC3-EZ (2.25" Grease Seal) is correct. For the EZ-Lube grease caps you can use part # rg04-120.

expert reply by: Conner L

Randy V.

4/23/2020

And what was the return policy for unused parts. Was thinking of ordering some drum assemblies so I have all the parts needed to finish what I started. If I don’t need them, then I might return them. Sorry for being such a pain. :-

Chris R.

4/24/2020

Not a pain at all! I linked our full return policy below. Please don't ever hesitate to reach out whenever you have questions or concerns.

Helpful Links

customer-service-ordering.aspx#returns

Randy V.

4/21/2020

So I am seeing 1/2” studs on the quoted drum assy. But I am seeing the 7k axle uses 9/16 studs and the 6k uses 1/2” Can you verify for me which it should be? Do you need a serial number? Also if I order parts and they are wrong or unused, what is your return policy?

Chris R.

4/23/2020

It looks like the stud size varies on 7K axles (1/2" is actually a bit more common) - it just depends on the particular hub assemblies that are used. This won't affect the fit of replacement shoes like what Conner mentioned. For replacement Dexter hubs with 9/16" studs you can use part # 8-219-13UC3.