bing tracking image
Customer Service My Orders
Q & A Icon

Replacement Wedge for Reese Revolution/Sidewinder Rotating 5th Wheel Pin Box  

Question:

My wedge is showing wear at the king pin. Should I replace it?. It is on a cherokee artic wolf 305 ML6. Thanks.

0

Expert Reply:

If the wedge on the Revolution is showing wear, it's definitely a good idea to replace it, as it could allow some side to side movement of the pin box at the king pin which is undesirable. This usually occurs when a universal wedge is used. They fit fairly well, but because they don't completely conform to the hitch funnel in the skid plate, wear can occur over time.

The wedges are hitch specific, the exact wedge needed will be determined by the 5th wheel hitch you're using.

For Curt 5th wheel hitches:

# C16992 for Curt A-Series

# C16991 for Curt E-Series

# SWW-06 for B&W Hitches (Not Compatible with the Companion)

# 30850 For Reese and Draw-Tite 15K, 16K and 20K Pro Series Hitches manufactured after 2009

# SWW-01 For Reese, Draw-Tite and Hidden Hitch Signature Series and Elite Series hitches as well as well as Select
Plus and the Ram OEM hitch manufactured by Reese.

# RP30865 for Reese Titan hitches

# SWW-09 for Pullrite hitches

# SWW-05 for Demco Hijacker

# SWW-07 for RBW hitches

# SWW-04 for Husky or Valley hitches

# SWW-08 for Colibert hitches

expert reply by:
0
Mike L
Ask The Experts a Question >>

Products Referenced in This Question








Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for 30850Instructions for SWW-04Instructions for SWW-05Instructions for SWW-06Instructions for SWW-07
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>