How To Switch from Door to Rear Camera on the Furrion RV Observation Camera System

Question:

We have Purchased the Vision S model. It has just one camera that we placed over our rear door of our toy hauler. We installed the camera and then took the monitor to our truck. We plugged it in and turned on the running lights. We have an excellent picture, however somehow it was already paired to the door camera instead of the rear camera. We would like to know if there is anyway to the pairing from camera one to camera four so we can get the backup grid that is available for the rear camera.

asked by: Ronald H

Expert Reply:

The Furrion RV Observation Camera Systems like part # FOS05TASF comes preset with the camera paired to the door cam channel. If you want to pair the camera to the rear cam channel, then you would need to do the following:

1) Press the menu button on the monitor.
2) Select pairing via the menu settings.
3) Select either of the rear cam channels.
4) Press the button on the bottom of the camera.

Please note you will need to have someone at the rear of the trailer to press the button on the camera as the pairing process will time out after 6-7 seconds. As you can see, there are three other channels on the Furrion RV Observation Camera System and I highly recommend using these for additional cameras, the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL for your trailer's blind spots and the Furrion Vision S Rear Camera w/ Sharkfin Bracket part # FCN48TASF for the vehicle or wherever else you want to put it.