Determining Trailer Light Assembly Functions for Wire Colors Yellow, Black, and White
Question:
Ok figured the lights out now the side marker lights there are 2 wires white wire and a yellow wire with a eye on it how do u wire it up
asked by: Garron
0
Expert Reply:
On the light assemblies the yellow wire will be the stop/turn circuit and the black will be the running light. So you have the white wires already figured out as the ground so on the right side of the trailer you'd run the green wire to the yellow wire of the light assembly and on the left side you'd run the green. You'd then run the brown wire to the black wires on both sides and you'd be set.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed For Flat Towing a 2024 Ford Maverick Behind a 2010 Winnebago Journey With Air Brakes
- Q&A: Caliper Bolts for AL-KO/Hayes Disc Brake Caliper BP18-050
- Q&A: Replacement Oil Seal for AL-KO 568303
- Q&A: Does The Progressive Dynamics PD4655V Have A Lithium Jumper
- Q&A: Which Instructions Are Used Installing a Roadmaster Brake-Lite Relay in a Ford F-150 w/ Neutral Tow
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Diode for Charging Line From Motorhome to Towed Vehicle (Toad)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Article: Trailer Tire Sizing
- Article: Flat Towing Package for 2014-2015 Chevrolet Equinox
Garron
4/2/2020
How do u wire this set up