Will a Rightline CampRight Truck Bed Tent Fit a 2008 Dodge Ram 1500 with 6-1/2 Foot Bed and Toolbox

Question

Question:

I have a 2008 Dodge Ram 1500 w/6.5 ft bed with a tool box mounted behind the cab. will the CampRight tent still work on my truck?

asked by: Gary

0

Expert Reply:

If you look at the instructions I have linked for the Rightline tent, # RL110730, you will see that the toolbox would interfere with the installation of the tent. In order to install the tent you would have to remove the toolbox. Otherwise this tent will fit a 2008 Dodge Ram with a 6-1/2 foot bed.

expert reply by: Michael H

0

Answer 1

I spoke to my contact at Rightline and she said that their truck bed tents like the part #RL110730 typically only will fit trucks that have soft roll-up tonneau covers. She did say that if your tonneau cover makes the bed rails any wider than they…

view full answer...

Answer 2

Whether the Rightline Truck Bed Tent #RL110730 will fit in your 2008 Toyota Tundra with 6-1/2-foot bed depends on the exact type and size of your truck bed toolbox. Some tool boxes extend over the tops of the bed rails, while others stay inside the…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 6

Great question. We did actually install a Rightline Truck Bed Tent #RL110730 on a 2018 Chevy truck just the other day. I will admit, this being the first time I had done one, it was slightly confusing at first. Having an extra pair of hands around…

view full answer...

Answer 7

The Pace Edwards Switchblade Retractable Hard Tonneau Cover #PE63CV covers the stake pockets so it won't be compatible with the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH94RE on your 2022 Chevy Silverado 2500HD with the 6-3/4' bed.…

view full answer...

Answer 8

The Westin Custom Fit Truck Bed Mat #50-6405 will fit perfectly in your 2022 Ford F-250 Super Duty Short Bed and you won't need to trim anything! Just be mindful that these come rolled up in a box so you'll need to unroll it and let it rest…

view full answer...

Answer 9

Reese (manufacturer of the Strait Line) has told me that the use of their weight distribution systems on an aluminum trailer is limited by what the trailer manufacturer states is okay. Since Featherlite has determined that your trailer is fine to use…

view full answer...

Answer 10

To install the Reese Titan Weight Distribution #RP66006 on a second trailer would basically just require you to install a second set of frame brackets on the trailer. The replacement brackets are sold individually as part #58392. You would need two.…

view full answer...

Answer 11

A weight distribution system is needed when the trailer being towed weighs more than 50 percent of the towing vehicle's weight or the vehicle sags when the trailer is coupled to the vehicle. There are a few things to consider when choosing a…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will a Rightline CampRight Truck Bed Tent Fit a 2008 Dodge Ram 1500 with 6-1/2 Foot Bed and Toolbox

Product Page this Question was Asked From

Continue Researching