How To Wire the Curt Push-To-Test Trailer Breakaway Kit

Question:

Well the instructions that come with this unit, pretty much suck. Switch does not have 2 black wires Blue on left/ Black on right, Panel has no yellow wire White/ Red/ Blue. Wired to what I read from the diagram and I have power the breaks.

asked by: David S

Expert Reply:

In regards to the Curt Push-To-Test Trailer Breakaway Kit part # C52042, the blue wire on the breakaway switch will be run to the brake output circuit and the black wire to a constant 12 volt power source. The blue wire on the battery box will also will be run brake output circuit, the red wire to a 12 volt power source, and the white wire to a ground.

expert reply by: Conner L