Will Fulton Fold-Away Coupler Hinge Kit Work With Big Bubba Trailer With A-Frame And Straight Tongue
Question:
Would this work on an A Frame with a straight toungue welded beneath?
asked by: Jordan C
Expert Reply:
The Fulton Fold-Away Coupler Hinge Kit for 3" x 5" Tongue part # FHDPB350101 will work with an A-Frame Big Bubba Deckover trailer with a straight tongue welded beneath it. As long as the straight tongue is a 3" x 5" trailer tongue with a material thickness between .188" and .120". Please take a look at the accompanying chart to determine the maximum pivot length allowable for your particular straight tongue.
If your straight tongue is not 3"x5" I have attached a link to the available trailer tongue hinges available.
Product Page this Question was Asked From
Fulton Fold-Away Coupler Hinge Kit for 3" x 5" Tongue - Bolt On - Up to 9,000 lbs
- Folding Trailer Tongue
- Coupler Hinge Kit
- Up to 48 Inch Long
- Bolt-On
- 9000 lbs GTW
- 3 x 5 Inch Tongue
- Fulton
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Complete Tow Package For A 2024 Kia Telluride LX
- Article: Trailer Wiring Diagrams
- Q&A: Towing a Boat Trailer with Folding Tongue Using Weight Distribution with Camper in Truck Bed
- Q&A: Comparing Demco Channel Tongue Trailer Coupler 12564 and DM12717
- Q&A: How To Choose Between a 1,000 Psi and 1,200 Psi Electric Over Hydraulic Actuator
- Q&A: Hitch Pin Weight Capacity and Sheer Strength
- Q&A: Flexible Brake Line For Fold Away Coupler Hinge Kit
- Q&A: Recommended Trailer Wiring for 2024 Kia Telluride LX
- Article: 2023 Holiday Must Haves
- Article: Where to Position the Trailer Axle?
- Article: Determining Trailer Tongue Weight
- Article: How to Measure a Trailer Axle
- Article: Trailer Jacks
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)