Correct Replacement Hanger Kit for Car Trailer
Question:
I have older parris car trailer. want to know if this will work to replace ? My quick measurements, A=30, B=30,C=35, all 3 hangers to center hole are 2 3/4inch 1 3/4inch wide springs D= 4
asked by: Michael S
1
Helpful Expert Reply:
It sounds like # APT9 is the correct hanger kit for you. Do the 2-5/8 inch shackle straps and 7-3/4 equalizers match your current parts? The hangers of the kit are a 1/4 inch shorter than your current ones but if everything else matches that's not going to be a problem for you.
expert reply by:
Charles S
1
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear/Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Why is Center Hanger Longer for Tandem Axle Trailer Hanger Kit
- Q&A: Comparing Lippert Road Armor to Equa-Flex for Kaufman Car Hauler
- Q&A: Hanger Kit for Tandem Axle Trailer that Needs More Wheel Clearance
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: How to Decide Which Tandem Axle Trailer Hanger Kit to Use
- Q&A: Can Red Identification Light Bar be Used as Marker & Reverse Lights
- Q&A: Determining The Correct Replacement Suspension Components For A 2018 Keystone Bullet Crossfire 270BH
- Article: Trailer Tire Sizing
- Article: How to Measure a Trailer Axle
- Article: Slipper Spring Trailer Suspension System Review
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer