Is It Possible this will fit on Another Manufacturers Awning ?

Question

Question:

Hi, Could you please help to confirm the #8880736 Replacement Mounting Bracket fit on other brand awning ?

asked by: EasonL

0

Expert Reply:

The Replacement Mounting Bracket for Yakima SlimShady Roll-Out Awning part # 8880736 is designed specifically for the Yakima SlimShady roll-out awning part # Y36VR. If you have the manufacturer and model information off of your awning I can help to find the part you need.

expert reply by: Randy B

0

Answer 1

Yes. You can mount an awning on Yakima Overhaul HD systems like the #Y01151-5855. If you wanted to use the Yakima Slim Shady Awning #Y36VR, that awning will mount using the included clamps to the HD bars on the Overhaul system. If you're…

view full answer...

Answer 2

The bolt hole spacing for the Replacement Mounting Bracket #8880736 is 4" on center (see attached). This will fit with the Replacement Clamp Assembly #8880737 and to your 2008 Honda Element factory crossbars just fine, you just have to make…

view full answer...

Answer 3

Yes, you can use the Replacement Clamp Assembly #8880737 and Replacement Mounting Bracket #8880736 for the Yakima SlimShady will work for your Roam awning. We actually have a review from a customer who purchased this combination for the same exact…

view full answer...

Answer 4

The vertical spacing you're asking for is 1-1/2" for the Replacement Mounting Bracket for Yakima SlimShady Roll-Out Awning #8880736 (see attached). I confirmed this with my contact at Yakima.

view full answer...

Answer 5

I was able to confirm with my tech contact at Yakima that all of the bolts in the Replacement Hardware for a Single Yakima Universal MightyMount 2005 and Newer #8880056 have 5/16" x 18 thread pitch. This would be the same for all of the…

view full answer...

Answer 6

I recommend something like the Rhino-Rack Batwing Awning #RR33100, which bolts to the driers side of your 2016 Ram 2500. The Rhino Rack Batwing covers 118 square feet, and will mount into the T-slot channels on the HD bars for your Overhaul HD…

view full answer...

Answer 7

The Yakima HD Crossbars like part #Y01158 use standard dimension top channels so you can use channel mounted accessories from pretty much any brand such as Yakima, Thule, Rhino-Rack Etc. without issue. That said, the channel hardware will be…

view full answer...

Answer 8

The Yakima SlimShady Awning - Roof Rack Mount - Clamp On - 64 Sq Ft #Y96VR will sit roughly 5-1/2" above the crossbars on your vehicle.

view full answer...

Answer 9

I may have a solution for you, but since we don't sell CVT awnings there's no way for me to test whether you'll be able to get the awning connected to your Yakima HD bars. I'll also say that the Yakima Replacement Clamps #8880737…

view full answer...

Answer 10

Here are the 2 different mounting options for installing the Batwing and Foxwing Awning Relocation Kit #RR31102. You can change the orientation of the brackets so that the awning will either hang higher or lower depending on your application.

view full answer...

Answer 11

The thickness of the T-bolt head of the part #Y8880184 you referenced is 5/32 of an inch. I attached a picture that has all of the other dimensions as well. These T-bolts are M10 x 1.5 x 25

view full answer...

Answer 12

Yes the channel nuts of the Batwing and Foxwing Hardware kit #RR33101 would fit into the slots of Yakima HD bars.

view full answer...

Is It Possible this will fit on Another Manufacturers Awning ?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching