Weight Distribution System for a 2006 Ford Explorer and 2007 Jayco Jay Feather LGT
Question:
What system do you recomend as best for weight distribution and sway control for a Ford Explorer 2006 V8 with manufacturer towing capability and a Jayco Jay Feather LGT 2007 30 FT?
asked by: Luis S
Expert Reply:
First, if your 2006 Ford Explorer factory trailer hitch is a 1-1/4 inch, you will not be able to use a weight distribution system without adding a 2 inch trailer hitch like # 75437.
With a 2 inch trailer hitch you can use a weight distribution system. From what I could find the gross weight of a 2007 Jayco Jay Feather LGT is 6,500 pounds maximum. This will put the tongue weight anywhere from 650 to 975 pounds and then you have to add the weight of anything loaded behind the rear axle of the tow vehicle.
A system rated for 600 to 1,200 pounds, like # RP66022, like you referenced would be a good choice. You would also need to add a shank, # RP54970, and a properly sized ball. For a 2 inch ball use # A-90 and for a 2-5/16 inch ball, use # 19286. I have included a link to our FAQ on weight distribution for you.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 1 Inch Drop
- Round - 5 Inch Rise
- Trunnion - 6 Inch Rise
- Reese
more information >
Product Page this Question was Asked From
Reese Weight Distribution w/out Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Installing Trailer Brake Controller on 2018 Ford Transit T250 with Factory 7-Way
- Q&A: Will Lift Bracket RP6637 and Chains 3216 Fit on Pro Series RB3 Weight Distribution System
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: How Does Brake Controller Install in Tiffin Phaeton 40AH
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: How to Determine Correct Weight Distribution System Spring Bars Are Needed
- Q&A: How to Install a Brake Controller on a 2017 Chevrolet Silverado 1500
- Q&A: Recommended Weight Distribution System For 12K Equipment Trailer
- Article: How to Survive the Winter In Your RV
- Q&A: Trunnion Spring Bars On Reese Strait-Line Weight Distribution System Fall Out During Turns
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Determining Trailer Tongue Weight