What is the Screw Diameter for Pro Series Trailer Jack # PS1400850383
Question:
Tongue jack is 2.25inch square and welded to frame. Nut stripped out, inner screw is ok, what is the O.D. of the screw inside of jack # PS1400850383?. Would like to just take bottom half of your jack for a replacement without having to cut the old jack off.
asked by: Dave H
Expert Reply:
I went out to the warehouse and took apart part of Pro Series jack, # PS1400850383. The screw inside was difficult to access but I was able to get a measurement of 3/4 inches at the threads and 1/2 inch at the top where the stem goes through the gear. I called my contact at Pro Series and he confirmed these measurements.
Product Page this Question was Asked From
Pro Series Square Jack with Footplate - Drop Leg - Sidewind - 28-11/16" Lift - 5,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 4001 - 5000 lbs
- Sidewind Jack
- 29 Inch Lift
- Weld-On
- With Rectangle Foot
- Pro Series
more information >
Continue Researching
- Shop: Bulldog Square Swivel Jack w/ Round Pipe Mount - Drop Leg - Sidewind - 28-1/2" Lift - 5,000 lbs
- Search Results: 190754
- Q&A: What are the Square Tubing and Foot Plate Dimensions of the Pro Series Square Jack # PS1400850383
- Shop: Bulldog Square Jack with Footplate - Drop Leg - Sidewind - 28-1/2" Lift - 3,000 lbs
- Shop: Pro Series Square Jack with Footplate - Drop Leg - Sidewind - 28-11/16" Lift - 5,000 lbs
- Video: Pro Series Trailer Jack - Side Frame Mount Jack - PS1400850383 Review
- Shop: Dutton-Lainson Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 28-1/2" Lift - Zinc - 2.5K
- Shop: Fulton Boat Trailer Jack w/ Footplate - Fixed Mount - 28" Lift - Zinc - 5,000 lbs
- Shop: Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 5,000 lbs
- Video: Bulldog Straight Tongue Trailer Coupler - Standard Coupler - BD028244 Review
- Search Results: trailer coupler
- Search Results: coupler
- Shop: Bulldog Collar-Lok Coupler w/ Pin - 2" Ball - 3" Channel Tongue - 5,000 lbs
- Q&A: How is Pro Series PS1400850383 Trailer Jack Installed
- Q&A: Does the Eclipse Square Jack with Footplate, # EC1400850376 Weld Directly to the Trailer Frame
- Q&A: How do you Replace the Internal Housing and Foot Plate on the Pro Series Square Jack # PS1400850383
- Q&A: Can Pro Series Square 8K Trailer Jack be Welded to a Trailer Frame
- Q&A: Replacement 5,000 Pound Jack For Air-Tow Trailer
- Q&A: Square Tube 5,000 lb Trailer Jack Recommendation with Sidewind Crank
- Search Results: ct~5003~z
- Video: Draw-Tite Long Shank 2 Inch Hitch Ball Review
- Video: Review of Draw-Tite Hitch Ball - Trailer Hitch Ball - 19258
- Video: Bulldog Hitch Pins and Clips - Linchpin - BD500219 Review
- Video: Draw-Tite 2 Inch Long Shank Hitch Ball Review
- Search Results: propane tank holder
- Search Results: atwood trailer jack
- Search Results: bulldog 190754
- Video: Bulldog Trailer Jack - Side Frame Mount Jack - BD195354 Review