What is the Maximum Tongue Weight Rating for the 2011 Hyundai Santa Fe V6 with 276 hp
Question:
recomended trailer hitch tounge weight for hyundai santa fe
asked by: Edwin P
Expert Reply:
The highest rated trailer hitch that we carry for the 2011 Hyundai Santa Fe, is the Draw-Tite Trailer Hitch, # 75684, which has a 3,500 lb weight carrying rating and 350 lb tongue weight rating. With weight distribution this hitch is capable of 5,000 lbs and 500 lbs respectively.
This means that as long as your specific vehicle is rated to tow at least the same amount of weight, you will be limited to the rating of the trailer hitch. If your vehicle is rated to tow less, you will be limited to the weight rating given to your vehicle by the manufacturer. Check your owners manual or the driver side door jamb for weight rating information specific to your vehicle.
The reason we cannot give you the specific rating for your vehicle is because the manufacturers equip vehicles with several different trim packages and they set the ratings for the vehicle by the options that are installed at the manufacturing plant. It is the vehicle owners responsibility to check the capacities of their vehicle and the weight of the fully loaded trailer and items carried in the vehicle to be sure they are not exceeding the capacity of the vehicle.
I added an FAQ article on how to determine tongue weight that also details how to weigh your vehicle and trailer at a commercial scale, see link.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Comparing Curt # 13195 and Draw-Tite # 75908 for 2017 Kia Sorento
- Q&A: Finding the Serial Number on a Roadmaster Sterling Tow Bar to Use Adapter for Blue Ox base Plates
- Q&A: How To Determine if a 2011 Kia Sorento has the Factory Towing Prep Package
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: How to Tell if 2020 Kia Sorento Has Factory Tow Package
- Q&A: Is Drilling Required to Install Draw-Tite Trailer Hitch on 2012 Hyundai Santa Fe
- Q&A: How to Determine if a 2013 Kia Sorento has a Factory Towing Prep Package
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Hitch Receiver Sizes