Replacement Hubs for Aluma 8610T Snowmobile Trailer.

Question:

I need new hub assembly for an Aluma 8610t snowmobile trailer. Will you part#AKIHUB-545-2-IK work?

asked by: David P

Expert Reply:

It looks like the Aluma 8610t snowmobile trailer has 12" wheels with a 5 on 4-1/2 bolt pattern, so that will help us get to the correct replacement hubs. But we will also need to determine the bearings on your current hub, which you'll have to remove the hubs and pull the bearings to find this information. Your bearings, races and grease seal will most likely have numbers stamped on the backs of them to help identify them, but if there are no stamps present you'll need to measure them using a digital calipers.

The AKIHUB-545-2-1K uses # L44643 inner and outer bearings, # L44610 races and the # 34823 grease seal. If your existing hubs use those components you can use the # AKIHUB-545-2-1K as a replacement hub.

I've linked two of our help articles on how to find the correct replacement bearings and the measurements of the most common sizes. If you can provide me with which components your hubs use, I can verify if you'll be able to use the # AKIHUB-545-2-1K or whether you need a different hub for your trailer.