Hitch for 2020 Honda Passport That Can Be Used with a Weight Distribution System
Question:
I just got a 2020 Honda Passport. Need a hitch that can be used with weight distribution.
asked by: Bob
Expert Reply:
When it comes to hitches that we have available for your 2020 Honda Passport that can be used with a weight distribution system, the Draw-Tite # 76290 is a confirmed fit for your new Passport and can be used with weight distribution systems like the Equal-i-zer # EQ37100ET. When using a weight distribution system with this hitch, the maximum tongue weight capacity is 900-lbs and the maximum towing capacity is 8000-lbs.
Since you'll be towing with this hitch, you may need some other components like a ball mount, hitch ball and wiring harness. I've gone ahead and listed some recommendations on those products below so that you can easily locate them within our site.
4 Way Trailer Wiring Harness # C56291 (easy installation- plug and play; comes with all fuses needed to activate tow package)
Ball Mount/Hitch Ball Kit # 989900 (comes with 2 ball mounts, 2 hitch balls, hitch pins and clips)
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 900 lbs TW
- 6000 lbs GTW
- 2 Inch Hitch
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Brake Assemblies and Hub/Drums for 15k Dexter Axle
- Q&A: Replacement Trailer Wheel for Dexstar Wheel 17-293
- Q&A: Recommended Hitch for a 2023 Honda Passport
- Article: Replacement Automotive Lighting
- Article: Trailer Tire Sizing
- Q&A: No Turn or Brake Signals on Trailer on a Jeep Liberty with Tow Ready Harness 118524
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Draw Tite Trailer Hitch Recommendation for 2024 Honda Passport Black Edition
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: My Trailer Hitch Doesn't Fit
Justin
5/7/2020
Hi! So the manual for the Passport has a max of 5,000 lbs towing with like 350 lbs tongue weight. I have the 5,000 lbs towing package. If I replaced my receiver with this one, would that safely upgrade the towing capacity of my Passport to 6,000 lbs with a 950 lbs hitchweight? Also, if I replace the receiver, I’ll still have the modified fascia, so will this one sag way under it or something?