How to Identify Needed Replacement Hubs for Adams Manufacturing Drift Boat Trailer
Question:
Trying to find the correct replacement hub for my driftboat trailer. Its an Adams Manufacturing made trailer and has Dexter EZ lube axles , its a 5 on 4 1/2 bolt pattern, back of axle has 1706 on it if this helps
asked by: Jeff W
Expert Reply:
The best way to find the correct replacement hub is to obtain the reference numbers from the inner and outer wheel bearing. I've provided a photo showing where to find the reference number on the bearing. The inner bearing would most likely be a L44643, a L44649 or a L68149. The outer would most likely be a L44643 or a L44649.
If you'd reply with the bearing numbers, I'd be happy to recommend a set of replacement hubs for you.
![Mike L](https://images.etrailer.com/static/images/catg/people/166_tn.jpg)
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Search Results: leaf springs
- Search Results: l44649
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Over-Under Trailer Springs Conversion Kit for a 2013 Jayco 154BH with Dexter 3K Axle
- Search Results: hub assembly
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Search Results: leaf spring
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Search Results: l44610
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: akihub~545~2~ez~2k
- Search Results: steel trailer fenders
- Q&A: Hub Fit For 2,000 lb Dexter EZ-Lube Axle & Trailer Tire & 12 Wheel With 5 on 4-1/2 Bolt Pattern
- Q&A: Replacement Hub for Adams Trailer with Dexter EZ Lube Axles with Bearings L44649
- Shop: Tailgate
- Shop: Truck Bed Tailgate Assist
- Q&A: How To Attach A Ground Wire To Trailer Frame
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Shop: Front Mount Hitch
- Video: TryRyde Tang Type Replacement Spindle Washer Review
- Video: Review of TruRyde D Washer For EZ Lube Spindles - 5-23
- Q&A: Removing Rusted Grease Caps from a Trailer Hub
- Video: Dutton-Lainson Trailer Spare Tire Carrier Review
- Video: Bearing Repacking and Grease Seals Installation
- Q&A: Is there a Way to Determine if a Trailer Grease Seal is Broken
- Q&A: How Far in a Trailer Hub Should the Grease Seal Go