Bearing Compatibility On A 2002 PJ 14+2 Dovetail Equipment Trailer With 5200lbs Axle
Question:
2002 PJ 14+2 dovetail equipment trailer with 5200 lbs axles and trailer brakes on both axles. Needing to know if these are the correct bearing kit.
asked by: Darren
Expert Reply:
While we know the axle capacity, the bearing kits like # BK3-300 are specific to the spindle that is installed so you will need to remove the hub to get the part numbers from the inner and outer bearings to determine the correct replacement parts for your spindles.
You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the spindle nut, remove the spindle nut, and then you will be able to remove the hub from your trailer.
The included photo of the parts provides where the part numbers are located and the areas that you will need to measure if your parts do not have part numbers etched on them.
Included are a couple of helpful video resources as well.
Product Page this Question was Asked From
Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing LM67048 and 25580
- Race 25520 and LM67010
- 5200 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Shop: Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Shop: Replacement Trailer Hub Bearing - LM67048
- Shop: Dexter Electric Brake Assembly for 4.4K Axles Manufactured After May 2009 - 10" - Right Hand
- Video: Review of Dexter Axle Trailer Brakes - 12 inch Electric Drum Brake Kit - 23-105-106
- Video: Dexter Left and Right Electric Trailer Brake Kit Installation
- Video: Dexter Electric Trailer Brake Assembly Installation 23-105
- Search Results: lm67010
- Search Results: k71~105~00
- Search Results: 25520
- Search Results: 67010
- Q&A: Will The Double Lip Seals in Bearing Kit # BK3-300 Work on a Horse Trailer
- Q&A: Replacement Components for a Dexter 5100 Pound Axle
- Search Results: grease cap plugs
- Search Results: 2.44 grease cap
- Search Results: k23~106~00
- Q&A: Replacement Trailer brakes for a River Wildwood 30KQBSS
- Q&A: Replacement Electric Brakes for a 2007 Jayco Jay Feather EXP w/Dexter Manual Adjust & EZ Lube Axle
- Q&A: Do Dexter Electric Brakes K23-462-00 & K23-463-00 Fit 4,000 lb Axles
- Q&A: Replacement Hub Recommendation for a Dexter 8-155 Hub
- Q&A: How to Determine if Dexter Brake Assembly is Manual or Self-Adjusting
- Video: Review of Dexter Trailer Brakes - Drivers Side Brake Assembly - K23-478-00
- Shop: Base Plate for Tow Bar
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler
- Shop: Trailer Wiring
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-300 Review
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR46ZR