Availability of a Hitch Adapter that will Give 4 Inches of Rise

Question:

I have an oversize load sign that is 60inch x 10. It is made of aluminum attached to a lightweight steel framework. It attaches/s into to a standard 2inch receiver. I need to relocate it up and forward. Thank you in advance.

asked by: Terry

Expert Reply:

You can use the Curt Multipurpose Ball Mount, part # D210. It will provide a rise of 4-3/4 inches above the top of the receiver opening on the hitch. This should provide you with the additional height you need, plus the ball mount receiver has a high enough tongue weight capacity at 350 pounds to handle the weight of your sign pretty easily.

You should note that when you use any type of adapter or extender you cut the tongue weight capacity of the hitch in half. So whatever the capacity of your hitch is you will need to cut in half to determine what your capacity is and make sure not to exceed it.

expert reply by: Jameson C