Backing Plates to Use With E-Track System on V-Nose Enclosed Trailer
Question:
Good morning I have a 6x12 V Nose enclosed trailer that I want t install a support plate under the trailer for the ez track. I have 2 10 ft tracks that run parallel to each other horizontal. Can you suggest what plate to use and screws or bolts.. Thank you
asked by: Quenitn
Helpful Expert Reply:
You're on the right track- the Brophy E-Track Backing Plate # BPEZ is what you'll want to use as a support plate under your E-track system like the Brophy # ET05 or Erickson # E19135. You'll want to use a backing plate at each end of the track and in the middle for the maximum support. Additionally, if the underside of your trailer is aluminum, you'll want to use a coat of paint or some other sort of insulating material to prevent galvanic corrosion between the two metals.
Products Referenced in This Question
Brophy Horizontal E Track - Zinc Plated Steel - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/4 Inch Wide
- 2000 lbs
- 5 Feet Long
- Brophy
more information >
