How To Measure To Replace Bent Trailer Axle
Question:
My tires have an inside wear can the axles be adjusted to correct this Bent axle
asked by: David F
Expert Reply:
It is normal for a round axle to have somewhat of a bow pointing up in the center such as the Dexter Trailer Axle Beam with EZ-Lube Spindles part # T3584F-EZ-8974 so that it can flatten out under a load. However if you trailer axle is bent somewhere else, bent down or bent up more than the accompanying photo then you will need to replace it to avoid uneven tire and suspension wear. There is not really a way to adjust it.
To replace the axle you would need to measure from hub face to hub face and then from spring center to spring center to get the correct replacement axle. You will also need to know the axle capacity of your existing axle. I have attached a diagram for your reference. For example the Dexter Trailer Axle I mentioned earlier part # T3584F-EZ-8974 measures 89" hub face to hub face and 74" spring center to spring center.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Trailer Wiring
- Shop: Lionshead Trailer Wheel Center Cap - 4.25" Pilot - Stainless Steel - Qty 1
- Shop: Trailer Wheel Center Cap, Chrome, 4.25" Pilot Size
- Shop: Replacement 11'1" Fabric for 12' RV Awning - Universal - Blue Fade
- Video: Solera Replacement Awning Fabric Measurement and Installation
- Search Results: aluminum wheel
- Search Results: aluminum wheels
- Search Results: 40008
- Search Results: bdw10039
- Search Results: mcl75ab
- Search Results: 10~19
- Search Results: mcl75rb
- Shop: Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Square - Amber Lens
- Shop: Black Bracket and Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights
- Shop: Rhino-Rack Sunseeker Awning - Roof Rack Mount - Bolt On - 7' Long x 6' 10" Wide
- Video: Rhino-Rack Sunseeker Awning Review
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Shop: Brake Controller
- Q&A: How to Check for a Bent Trailer Axle Spindle
- Q&A: Picking Out Trailer Leaf Spring for Trailer that Weighs 3,000 lb
- Q&A: Replacement Leaf Spring for 2021 Wolfpack 365PACK16
- Q&A: MORryde CRE3000 or Dexter E-Z Flex Trailer Suspension Equalizers?
- Q&A: Should There Be Play Between the Leaf Spring Eye Bushing and Shackle Bolt on a Trailer
- Q&A: When Moving Leaf Spring Above Axle Can U-Bolts be Reused
- Q&A: Replacement Double Eye Leaf Spring Recommendation for a 2018 Grand Design Reflection 312BHTS
- Shop: Gooseneck Hitch
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs