Recommended Hubs for Timbren 3,500 Lb Drop Axle-Less System with 5 on 4-3/4 Inch Bolt Pattern
Question:
What is the part # for the matching hubs with a 5 on 4 3/4inch BC? Also what else would I need to make this a complete system?
asked by: Frank B
Expert Reply:
The Trailer Idler Hub Assembly part # AKIHUB-5475-35-EZ-K is compatible with the Timbren Axle-Less Trailer Suspension System part # ASR3500S04 and has the 5 on 4-3/4" bolt pattern you are after. If you want to add brakes you would need the Trailer Hub and Drum Assembly part # AKHD-5475-35-EZ-K and Electric Trailer Brake Kit part # AKEBRK-35-SA instead. Also, the Mounting Hardware for 10" Brake Assemblies part # BRKH10B would be needed if adding brakes.
The Timbren Axle-Less Trailer Suspension System comes with everything needed so once you have the hubs all you need to finish is wheels/tires and lug nuts.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Where to Position the Trailer Axle?
- Article: Trailer Tire Sizing
- Article: Trailer Maintenance Schedule
- Q&A: What Trailer Weight Requires Brakes
- Q&A: Are Westlake T235/75R15 Radial Off-Road Trailer Tire High Quality
- Q&A: How To Lower a Trailer 3 Inches
- Q&A: Replacing Torsion Axle with Timbren Axle-Less Suspension System on Boat Trailer
- Q&A: Is It Normal For One Shackle To Point Up and The Other Point Down After Replacing Equalizers?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What are the Dimensions of the T-Handle Locking Door Latch # L4080
- Q&A: Can the T-Handle Door Latch Assemblies # L4080 Be Ordered Keyed-Alike?
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Wiring Diagrams
- Article: How to Measure a Trailer Axle