Will the Pro Series Trailer Hitch Mounted Cargo Carrier Fit a 2008 Acura MDX

Question:

Will the 24x60 cargo carrier work all clearances for a 2008 accura mdx. Would I need the light kit?

asked by: Buddy G

Expert Reply:

On the trailer hitches we have installed on a 2008 Acura MDX and similar models, we have found that the distance from the center of the hitch pin hole to clear the rear bumper on the vehicle measures up to 5 inches.

The Pro Series Cargo carrier, # 63153, measures 12-3/4 inches from the center of the hitch pin hole to the nearest edge of the carrier so it will clear the rear bumper. This is also enough distance to allow you to open the rear hatch on the vehicle.

If your tail lights are blocked by the carrier, you will want to use the light kit, but it is just a good idea to use it in general for safety. There are 2 light kit options: # 20174 uses regular bulbs and # 98174LED uses LED bulbs. The LED bulbs draw less power and tend to be brighter. Otherwise they install the same. Take a look at the video I have linked.

To power the lights, you will need a 4-Way wiring harness on the vehicle. If you need one, use # 118424. I have included some links that show how to install the wiring harness for you.

expert reply by: Michael H

12/11/2012

I have a 2008 MDX also. Does the rear hatch open with the eTrailer 20cu ft cargo bag filled? Thanks.

Patrick B.

12/13/2012

On a similar carrier, a 2012 MDX cargo door breaks over the carrier at the 20 inch mark. The 63153 has a bit of a rise to the shank, but it sticks out further than the carrier we measured. Check out the link to the video. The etrailer cargo bag measures 24 inches tall when completely filled, so the cargo door will most likely contact the bag before it is opened all the way.

Helpful Links

tv-install-curt-20x60-carrier-2012-acura-mdx-c18100.aspx