Can 2020 Jeep Wrangler with Smittybilt Atlas Front Bumper be Flat Towed behind Motorhome
Question:
My 2020 Jeep Wrangler has a Smittybilt Atlas front bumper that I want to flat tow. How can I connect a tow bar to it so that I can flat tow it behind my motorhome.
asked by: Jesse
Expert Reply:
Blue Ox has the base plate kit part # BX88357 which was designed specifically for fitting the Smittybilt Atlas front bumper you have on your 2020 Jeep Wrangler so it is exactly what you need to connect to a Blue Ox tow bar like the # BX7420 which is really easy to use and very well made.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Blue Ox Avail Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 10000 lbs
- Fits Blue Ox Base Plates
- Stores on RV
- Non-Binding
- Blue Ox
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Product Page this Question was Asked From
Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 7/8" D-Rings
- Base Plates
- Aftermarket Bumper Adapters
- Hitch Pin Attachment
- Blue Ox
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Must-Have Flat Towing Components
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Can I Flat Tow a 2023 Ford Bronco Using the Recovery Hooks?
- Q&A: Is There a Blue Ox D-Ring Adapter for a Smittybilt XRC Gen2 Bumper
- Article: How to Choose a High-Low Adapter
- Q&A: How To Use a Tow Bar With a Poison Spyder/Smittybilt Front Bumper on a 2018 Jeep JK Wrangler
- Q&A: Is 1/16 Inch Too Much Play for Blue Ox Bumper Adapter
- Q&A: Parts Needed To Flat Tow 2020 Jeep Wrangler With Smittybilt XRC Bumper Gen 2
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Q&A: Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 1 1/8 2021 Bronco D-Rings
- Q&A: Availability of Dexter Leaf Spring 072-079-00 for 8,000 lb Trailer Axle
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler