Combined Trailer Turn Signal and Side Marker Running Light for a Trailer with no Side Markers
Question:
Id like to add a side marker light to a long trailer I have that currently has no side markers. But Id like a dual circuit, so its on with headlights as a marker but has a blinker capability as well.
asked by: Richard
Expert Reply:
On a trailer, the turn signals and brake lights are combined. So if you where to wire in a side marker light but also wanted to have it light up with the running lights, it would end up lighting up with the brakes as well.
You can use the Optronics light, # STL90A24B, for this purpose. The White wire would ground to the trailer frame, the red wire would connect to the trailer wire carrying the turn and brake lights. The last wire would connect to the running light circuit.
Product Page this Question was Asked From
LED Transit Turn Signal and Parking Light - Submersible - 31 Diodes - Amber Lens
- Trailer Lights
- Tail Lights
- Parking
- Turn
- Round
- Surface Mount
- Submersible Lights
- LED Light
- 7 Inch Diameter
- Amber
- Optronics
more information >
Continue Researching
- Shop: LED Transit Turn Signal and Parking Light - Submersible - 31 Diodes - Amber Lens
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Comparing the Transit # STL90R24B and # STL90RB Tail Lights
- Q&A: What Size Hole Needs to Be Cut To Install the Sealed 4 inch Diameter Optronics Light STL42RB
- Q&A: Will the Optronics Load Resister # ALEDRST2B Give Me Turn Signals with My Optronics Tail Lights?
- Q&A: Easily Removable Fifth Wheel Hitch that Leaves Truck Bed Unobstructed
- Q&A: How To Stop Leer Third Brake Light from Flashing with Turn Signals
- Q&A: Third Brake Light Still Flashes With Pacer Logic Module Installed
- Q&A: Could Both Wires of 3rd Brake Light Logic Module Be Ran to Single Turn Signal Circuit