How Long Are Spring Bars on Curt MV Weight Distribution System C17063
Question:
I will include and email with picture of the trailer with tape showing length. After reviewing the pic can you tell be if the bar lengths work? My concerns is cross member and what chain system will work on it. specs are right for my configuration.
asked by: Floyd M
Expert Reply:
The spring bars on the Curt MV Weight Distribution System # C17063 are 31-5/8 inches long. Judging by the photo you attached, you should be able to install the chain brackets behind the cross member but it may be a tight fit.
What I would recommend is to also purchase a set of bolt-on chain brackets # C17005 just in case you run into any clearance issues. These brackets are bolted to the side of your trailer frame so any interference on top or on the inside of your trailer frame is inconsequential. This will allow you to install the system either way and if you find you didn't need the bolt-on brackets, you can always return them.
I've attached a review video as well as a link to our Returns Policy.
Products Referenced in This Question
Chain Hangers for Curt Weight Distribution Systems - Bolt On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- CURT
more information >
Product Page this Question was Asked From
Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Does Not Allow Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: curt parts
- Shop: Suspension Enhancement
- Shop: Curt Trunnion Style Weight Distribution System with Shank, 1,000 lbs. TW, 10,000 lbs. GTW
- Q&A: Using Curt Short Arm Weight Distribution System on V-Nose Trailer
- Shop: etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Mud Flaps
- Shop: Roof Rack
- Shop: Vehicle Air Mattress
- Shop: Vehicle Tow Bar Brake System
- Shop: Exhaust
- Search Results: trunnion
- Shop: Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 10K GTW - 1K TW
- Shop: Curt Replacement Weight Distribution Head for Trunnion Style Bars
- Shop: Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Replacement Trunnion Bar Kit for Curt Short-Arm Weight Distribution System - 800 lbs TW
- Shop: Curt Weight Distribution Shank - 14" Long - 7" or 7-1/2" Drop - 1,500 lbs TW
- Q&A: Replacement Spring Bar Retainer Clips for Curt Trunnion Bar Weight Distribution System
- Q&A: Will an Extended Weight Distribution Shank Effect Towing Performance
- Q&A: Will the Curt Weight Distribution Shank # C17122 Fit the Eaz-Lift Weight Distribution System
- Q&A: Where Do the Conical Tooth Washers Install on a Curt Weight Distribution System
- Q&A: Replacement Hardware Recommendation for a Curt Trunnion Bar Weight Distribution System
- Q&A: How To Mount Weight Distribution System to American Hauler Enclosed Trailer with Existing Brackets
- Video: Customer Review - Curt MV Weight Distribution System
- Article: Determining Trailer Tongue Weight
- Video: Curt TruTrack Weight Distribution System Review
- Article: How to Install a Trailer Hitch
- Video: Curt MV Weight Distribution System Review