Storage Cover For 2017 Jayco Hummingbird 17FD That Won't Rip

Question

Question:

2017 Jayco hummingbird FD, need the right cover.tried the R pod cover...ripped it trying to put it on. Need a suggestion

asked by: James M

0

Expert Reply:

The SFS AquaShed Cover for Travel Trailer - Up to 18' - Long - Gray part # 290-52239 is what you need for the 2017 Jayco Hummingbird FD. The Aquashed features a 3-layer fabric that will protect the Hummingbird from the elements and will not tear. It has cinch ropes and straps to contour the fit of the cover to match your trailer. The straps will reduce billowing which can sometimes cause other covers to be torn off in the wind. This cover will fit 15'1-18' trailers so it will fit your Hummingbird well.

expert reply by: Heather A

0

Answer 1

Your 2017 Jayco Hummingbird 17FD is indeed very similar in shape and size to the Rpod 178 camper. For a storage cover that will work great on I do recommend the Adco RV Cover #AD37ZR that you were looking at. This is confirmed to fit the trailer and…

view full answer...

Answer 2

The Adco Tyvek line is at this time not available (May 2021) due to some supply issues of the Tyvek material but their AquaShed SFS line is available like the part #290-52239 which is the same size as the Tyvek you mentioned.

view full answer...

Answer 3

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 4

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 7

For your utility trailer, there aren't specific covers made, however you can use a travel trailer cover for your application. I recommend the Adco Olefin HD RV Cover for Travel Trailers up to 18' - All Climate + Wind - Gray #AD37ZR or the…

view full answer...

Answer 8

Yes, the Extang E-Series Tonneau part #EX27UV does fit trucks that have spray-in bed liners and bed rail covers. The cover brackets can clamp to your bed rails without requiring trimming the cover as well.

view full answer...

Answer 9

Yes, the Adco Olefin HD travel trailer cover part #AD97ZR does for sure fit your 2015 Jayco X20E. We have confirmed this with Adco.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

That's good you've identified the issue and I do agree it does sound like the module. However, we do not have replacement modules for Air Lift compressors. I recommend getting a part number off of your compressor and reaching out to Air Lift…

view full answer...

Storage Cover For 2017 Jayco Hummingbird 17FD That Won't Rip

Product Page this Question was Asked From

Continue Researching