Does It Matter Which Wire Gets Connected To Electric Brakes for Power
Question:
Electric Trailer brakes. Does it matter which wires get connected to the new replacement brake drums?
asked by: Mike
Helpful Expert Reply:
With electric trailer brakes such as the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA, it does not matter which wire is the power wire and which is the ground wire. I added a cut out from the linked help article on electric drum brakes for you which you an see. You will simply need extra 10 gauge wire # 10-1-1 which is sold by the foot so you can get exactly the length you need.
Products Referenced in This Question
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Brakes for a 5th Wheel Trailer with 5.2K Lippert Axles
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Axletek-12-GG Replacement Brake Assembly and Hub Recommendation
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: How Thick Are Electric Brake Shoe Pads and When Should They be Replaced
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
- Q&A: Replacement 12 x 2 Inch Electric Brakes for AxleTek Trailer Axle B12E-02 12-GG
- Q&A: Trailer Brakes are Very Weak Even After Adjusting Them