Invis-A-Rack Ladder Rack and Tonneau Cover for 2019 Ford F-150 With 6-1/2 Foot Bed

Question

Question:

2019 f-150 xlt supercab 6.5 How to install Invisarack with low profile qt together Thank you

asked by: Steven

0

Expert Reply:

While there is a tonneau cover that can be used with the Invis-A-Rack Folding Ladder Rack # DZ951600 that fits your 2019 Ford F-150 with a 6-1/2 foot bed, the cover you are referring to is a Truxedo Lo Pro that was specifically designed to fit with the Invisi-A-Rack; that cover is no longer available so the best option is a different rack and tonneau.

The Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-501 installs on top of the bed rails of your F-150 you will need a cover that installs inside your bed rails and we have found the only covers that fit with a ladder rack are the BAK Revolver X2 Hard Tonneau Cover # BAK39327 or BAK Revolver X4s # BAK27ZR.

expert reply by: Kyle S

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only…

view full answer...

Answer 3

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 4

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 5

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 6

Thanks for reaching out, Roy! The tie-down rails you see in the discussion video for your 2023 Ford F-150 Lomax Stance Hard Tonneau Cover #LOM76DR isn't something that we carry and it doesn't look like Lomax has them either, but we do have…

view full answer...

Answer 7

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 8

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Invis-A-Rack Ladder Rack and Tonneau Cover for 2019 Ford F-150 With 6-1/2 Foot Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching