Will Reese 16K 5th Wheel Hitch Work with Lippert Turning Point Pin Box
Question:
can i use fifth wheel hitch with the new turning point pin box? currently have a 16k reese fifth wheel hitch?
asked by: Taylor G
0
Expert Reply:
Yes, your existing Reese 16K 5th Wheel Hitch (our part # RP30047) is compatible and will work perfectly with the Lippert Turning Point Pin Box as long as you use the appropriate wedge.
The Turning Point might come with its own wedge but if not you can use the Reese Custom Wedge # SWW-03. This is what keeps the king pin from pivoting at the jaw connection on the hitch.
expert reply by:
Chris R
0
Products Referenced in This Question
5th Airborne Custom Wedge for Select Series Fifth Wheels
- Accessories and Parts
- Fifth Wheel King Pin
- Wedges
- Reese 5th Wheel
- Reese
more information >
Product Page this Question was Asked From
Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs
- Fifth Wheel Hitch
- Fixed Fifth Wheel
- Aftermarket Below Bed Rails
- 4000 lbs Vertical Load
- 16000 lbs GTW
- Double Pivot
- Standard - Double Jaw
- 13-1/2 - 17 Inch Tall
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Can I Use A Curt A20 With A Reese Sidewinder On A Ram Truck With The Rambox
- Article: Ram Trailer Tow Prep Package
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Proper Replacement for Reliable ACT-7.5K Brake Actuator
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Q&A: Wedge For Reese Sidewinder RP34FR & Demco Recon 5th Wheel Hitch
- Article: Fifth Wheel Hitch Combinations for Ram Trucks with RamBox (2009-Current)
- Q&A: Recommended Air Bags and Compressor for a 2002 Ford E-450 Class C
- Q&A: Are Capture Plates Needed When Using the Demco Autoslide With a Lippert Road Armor Pin Box