Parts Needed to Flat Tow 1990 Mazda Miata
Question:
What we need to tow behind a 2017 24 ft chateau rv
asked by: Rick S
Expert Reply:
The first thing you need to flat tow your 1990 Mazda Miata is a base plate kit. Which for that you'd want the Roadmaster part # 711-4 which is a confirmed fit.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terrain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9243-1 which comes with all of that as one part number. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Roadmaster Falcon All-Terrain Tow Bar - Non-Binding - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Non-Binding
- Roadmaster
more information >
Roadmaster Accessory Kit for Falcon Tow Bars - Tail Light Wiring - Safety Cables - Lock Set
- Accessories and Parts
- Tow Bar
- Accessories Kit
- Falcon 2
- Falcon All Terrain
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Hitch Pin Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Base Plates, Tow Bar, Safety Cables, and Wiring to Flat Tow 1991 Mazda Miata MX-5
- Q&A: What is the Distance of the Mounting Bracket Bolt Holes
- Q&A: Can a Curt Tow Bar be Adapted to Fit Roadmaster EZ Base Plates on a 2007 Toyota Yaris
- Q&A: What is the Measured Distance Between the Attachment Points for the Tow Bar on the Tow Ready Adapter
- Q&A: Can Curt Tow Bar Attach to Base Plate Kit that Fits 2002 Mazda Miata
- Q&A: What Parts And Accessories Do I Need To Flat-Tow 1990 Mazda Miata MX-5 Behind 2001 Winnebago Brave
- Article: Flat Towing Package for 2016-2018 Ford Focus
- Q&A: Base Plate Availability for a Mazda Miata
- Article: How to Choose a High-Low Adapter
- Article: Must-Have Flat Towing Components
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Roadmaster Vehicle Specific Base Plates
- Article: How to Choose the Right Trailer Hitch Class