Correct Hubs and Electric Brake Assemblies to Use with Timbren Axle-Less System # ASR1200S04

Question:

Description saysin various locations: Brake flanges let you install 2,000-lb rated brakes Works with Dexter 1,750-lb hubs Spindle/Hub compatibility: •Bearings: Inner: L68149 Outer: L44649 •Races: Inner: L68111 Outer: L44610 •Seal: 58846 Outer diameter: 2.565inch Inner diameter: 1.719 When I search hubs and drums by bearings I find etrailer 3500lb 10inch EZ lube hub/drum assemblies. Is this correct for this axle, or is the other info higher up in the description regarding 2000lb brakes and 1750lb hubs the correct info? If the Dexter 3500lb hub/drums are correct, please also verify the Dexter 10inch electric brakes 23-468-469 or 23-26-27 will bolt up to that 4 hole flange. Thank you!

asked by: Roger

Expert Reply:

The etrailer 3,500 Pound Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K that you referenced is indeed the correct hub/drum for the spindles on the Timbren Axle-Less Trailer Suspension System # ASR1200S04. These will fit with this system perfectly and they feature a 5 on 4-1/2" bolt pattern. This is the most common pattern for this capacity but you will just want to make sure it matches the hole/bolt pattern on your wheels.

I have attached an article on measuring your bolt pattern if you aren't sure.

Then for matching brake assemblies the Dexter Nev-R-Adjust Electric Brake Kit # 23-468-469 that you also mentioned will work perfectly both with these hub/drums and the Timbren mounting flanges. The Nev-R-Adjust assemblies are the way to go since they eliminate the need for manual adjustments down the line.

I have attached a couple few video demonstrations on these products that you can check out as well.

expert reply by: Chris R