Torque Figure for Installing Sleeve-Lock Trailer Coupler # CTA-296
Question:
What is the proper torque for the 2 channel to coupler mounting bolts?
asked by: Chuck
0
Expert Reply:
159 ft lbs of torque would be the torque figure needed when tightening the hardware that secures the Sleeve-Lock Trailer Coupler # CTA-296 to the channel.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Sleeve-Lock Trailer Coupler - Adjustable Channel Mount - Black - 2-5/16" Ball - 12.5K
- Adjustable Trailer Coupler
- Coupler Only
- 12500 lbs GTW
- 2-5/16 Inch Ball Coupler
- Pin-Style Fastener
- Self-Adjusting Head
- etrailer
more information >
Continue Researching
- Shop: Dexter Electric Trailer Brake Kit - 12-1/4" - Left and Right Hand Assemblies - 8,000 lbs
- Q&A: Recommended Trailer Brake Kit For Gatormade Aardvark With 8k Dexter Axles
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12-1/4" - Left/Right Hand Assemblies - 8K
- Q&A: Replacement 12-1/4" X 2-1/2" Electric Brakes For a Dexter 8,000LB Trailer Axle
- Shop: Dexter Electric Trailer Brakes - Parking Brake Ready - 12-1/4" - Left/Right Hand - 7.2K
- Shop: Dexter Electric Trailer Brake Assembly - 12-1/4" - Left Hand - 8,000 lbs
- Shop: Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 3-3/8" - Qty 1
- Q&A: Troubleshooting End of Slipper Spring Popping Out on 2023 Outlaw Gooseneck Flatbed Trailer
- Q&A: What is the Hanger Spacing on the 6-Leaf Slipper Spring # e46SR?
- Q&A: Is The Composite Or Steel Demco EZ Latch Coupler A Better Choice Over The Other?
- Q&A: Can Locking Pins Be Used With the Sleeve-Lock Trailer Coupler
- Q&A: Mounting Bolt Pattern and Center Hole Diameter For Dexter Trailer Brake Assemblies 23-248 and 23-429
- Video: Review of Dexter Trailer Brakes - Electric Drum Brake Assemblies - DX32QR