Do Dexter 3,500 lb Axles Use Hubs With L68149 and L44649 Bearings
Question:
Not sure on bearing size on my trailer..do all the 3.5k Dexter axles have same inner and outer bearings ? The axle is on a B Wise 5x8 trailer ..may have to call B Wise for info..I have no way to get proper measurements...thanks again for your time !! P.S... THIS SITE IS THE MOST USEFUL SITE I HAVE USED..PRICES ARE FAIR AND THE INFO YOU PRVIDE IS PRICELESS..MY WORK DAY STARTS AT 3AM SOME DAYs END AT 5 OR 6 PM or later. ..NOT A LOT OF TIME FOR RESEARCH...
asked by: Chris
Helpful Expert Reply:
Thanks for the kind words, it's nice to hear! Also, it is extremely likely that your Dexter 3,500 lb axle is going to have inner bearing # L68149 and outer bearing # L44649 which will allow you to use the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 # 84655UC1-EZ you referenced.
For reference, every single one of the Dexter hubs we carry for 3,500 lb axles use those same bearings so this hub will work for you without issue.
I've added a link to a video review of this hub for you to check out as well.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Where to Measure to Pick Out Replacement Hubs for a Trailer
- Search Results: boat trailer parts
- Search Results: four winns
- Q&A: Could Studs of Dexter 3,500 lb Trailer Hub Be Removed
- Q&A: Correct Non-Braking Idler Hub Replacement for Dexter 8-250 Trailer Hub
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Video: etrailer Trailer Hub and Drum Assembly Installation AKHD-545-35-K
- Q&A: 6k Hub Drum that Can Fit Timbren Axle Less Kit part # ASR1THDS03
- Q&A: Availability Of 33" Ark Stabilizer Jack And Dimensional Diagrams Of Similar Ark Corner Steadies
- Q&A: How To Use Toyota TRD Pro 17 Inch Wheels With Hubs On a Dexter 3,500 Lb Axle
- Q&A: Mounting Plate Dimensions for Ark XO Drop Down Corner RV Stabilizer Jacks
- Article: Determining Trailer Tongue Weight
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Choose a Trailer Hitch Coupler
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Most Popular Wheel Bearings
- Article: Trailer Hitch Receiver Sizes